POLARSTAR M60 FUSION ENGINE
Features:
- FE Profile: M60/MK43 Gearbox
- Included FE Nozzle Type: M60/MK43 Series, Blue (FE-NZ-BLU-M60)
- User selectable Semi/Full Auto, Semi Auto Only and Variable Burst modes
- Cyclic Rate: 500 RPM to 1,800 RPM - Fully adjustable
- Power Source: HPA (High Pressure Air via Remote Air Rig)
- FCU Battery: 7.4v LiPO or 9.6 NiMh
- FCU Voltage Input Range: 6.8v to 12v
- PSI Operating Range From 90~120 psi
- Electronics: REV2
- PSI Operating Range: 80 psi. to 120 psi
- Build Material: Aluminum
- Weight: .75 lbs
- Compatible with A&K and VFC M60 & MK43
- ETA: 9/8/14
Description:
The Fusion Engine by PolarStar has been tested in the field and has succeeded in all known conditions. Now the Fusion Engine is available for some of the largest support weapons in the airsoft world: the M60 and MK43. No longer do users have to worry about fine tuning internals and replacing broken parts. Simply remove the gearbox and motor, drop in the Fusion Engine, and route the air rig to your HPA system. The FCU (Fire Control Unit) allows users to easily initiate different firing modes, adjust rate of fire (ROF), and adjust valve timing to the exact specifications you need. The FPS can be adjusted by regulating your PSI and using different PolarStar valves found here at AirRattle.com. The MCU (Motor Control Unit) allows you to utilize the original AEG Box Magazine without any rewiring or soldering. Simply plug the MCU into the box magazine and you are ready to fire. With the Fusion Engine, you get the proven reliability of PolarStar's signature system while being able to adjust every performance setting and even replicate the cyclic rate of its real-steel counterpart, all without affecting velocity and maintaining the superb trigger response Fusion Engine's are known for.
This Fusion Engine comes with the Blue nozzle pre-installed:
BLUE: 380fps with 275mm Barrel, 405fps with 380mm Barrel, 435fps with 509mm Barrel.
Warning: We at AirRattle.com recommend all upgrade / repair parts are installed by a professional as additional upgrades and/or custom fitting may be required. It is the responsibility of the customer to ensure the part is compatible with their gun prior to purchase. We are not responsible for any damage caused during or after installation and are installed at customer?s discretion.
1 Review
-
Polarstar m60
You guys did a great job! My package was shipped fast and was also packaged tight. No damage and very happy with with service.
